FLSUN QQ-S - Enclosure
thingiverse
Enclose for the QQ-S/QQ- Pro You will need: Acetate 50x70cm 0.7mm thick - 3 sheets Printed parts: - 4x door side - hinge side (I joined all 4 together in a print with small linkages for stability) - 4x door side - non-hinge side (I joined all 4 together in a print with small linkages for stability) - 2x base side LH - 2x base side RH - 2x top side LH - 2x top side RH - 1 x all other parts I printed at 0.3mm layer height on the FLSUN QQ-S Pro with no supports I recommend attaching the door section on first before the sides I used back duct tape to hold the shape of the acetate on the side sections to the towers I used 10mm magnets for the side pieces and door - will also take up to 20mm magnets
With this file you will be able to print FLSUN QQ-S - Enclosure with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FLSUN QQ-S - Enclosure.