FLSun QQ RepRapDiscount Full Graphic Smart Controller frame

thingiverse

I was fed up with the limitations of my MKS TFT display so I decided to upgrade to a standard LCD for full access to menus. I didn't want to start from scratch, so I chose [this case from ZilDV ](https://www.thingiverse.com/thing:563515/). Remove the MKS TFT from your QQ and install it as per the pictures. <b>Materials:</b> 4 M3x10, 4 M3x30(depending on how thick your display ends up), 8 M3 Nuts(if you strip the plastic) RepRapDiscount full graphic smart controller Display. [Amazon US Link](https://www.amazon.com/gp/product/B076WQQX5K/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) (This is the one I bought but it has the upside down connectors) I designed tolerances for tapping the holes with a M3 tap, if your going to use nuts drill them out to 3mm. <b>Note for ZilDV case:</b> The design is based on a version of the board that has a removable display. Most now are soldered to the board. I printed the middle section up to a height of 3.3mm and stopped the print, at that thickness it fit perfectly between the two PCB's and the case halves. <b>Note for LCD:</b> Some boards have the connectors installed upside down if the display doesn't work this is probably why. Easy fix, just Google it...