FLsun QQ Enclosure

prusaprinters

<p>The way the FLsun QQ is designed makes it easy to enclose it. Printing ABS is<br>possible with this enclosure.</p><p>The printer sides are covered with a five mm tick board, 31.4 x 66.6 cm. The<br>corners of the panels have notches cut into it. The notches are 8 x 13 mm. A<br>helpful template tool to cut them is included. You need to print three sets of<br>these files except for the tool.</p><p>The panel I used is foam boards. Use another material since it can be a fire<br>hazard. A more rigid material is preferable. I had to glue some reinforcement<br>as shown in the picture. The boards are five mm tick.</p><p>The brackets are slightly slanted to fit the printer's shape. So, a given<br>bracket goes only in one of the four corners.</p><p>The brackets are held to the printer using the screws that retain the vertical<br>rounded panels.</p><p>The extruder will hit the walls if you print an object larger than 22 cm in diameter.</p><p>Support that touches the build plate is required.</p><p>This object main web page is:<br><a href="http://www.ctheroux.com/flsun-qq-enclosure/">http://www.ctheroux.com/flsun-qq-enclosure/</a>.</p><p>You can request the source files on the page listed above.</p>