FLSUN Q5 3.5" Display

thingiverse

# **FLSUN Q5 3.5" Display** ## A bigger display for the FLSUN Q5 <br> ### Summary Four brackets at the corners of the control box's display opening are screwed to the existing thread holes. The bracket's arms lead through the opening, holding a Makerbase MKS Robin TFT35 3.5" LCD display at an angle of 15 degrees for convenient operation. A snap-in casing is also included. ### Print The brackets should be rotated appropriately to minimize support structures. To produce sturdy parts the infill rate should be at least 25 %. After printing the support material has to be removed, especially the 1.5 mm slits that should fit to the control box opening sheet might need a slight rework with a warding file. ### Assembly The existing 2.4" LCD is removed by unscrewing four fixing screws and unplugging the ribbon cable. To gain some more space for fingers and tools, the power supply's housing might be loosened. The brackets are screwed to the original display's thread holes at the inside of the control box. For easier fastening M3 screws preferable with hexagonal heads can be used. The new LCD is connected to the ribbon cable and its PCB fixed with four M3 screws, washers and nuts to the brackets. The ribbon cable might be relocated to utilize its full length. ### Marlin configuration.h version 2.0.9.1 ``` #define MKS_ROBIN_TFT35 #define TFT_ROTATION TFT_ROTATE_180 #define TFT_COLOR_UI #define TOUCH_SCREEN_CALIBRATION #define SINGLE_TOUCH_NAVIGATION #define TOUCH_CALIBRATION_AUTO_SAVE ``` version 2.0.7.2 ``` #define TFT_480x320 #define TFT_ROTATION TFT_ROTATE_180 #define TOUCH_CALIBRATION_X 17191 // these values might do as a starting point, #define TOUCH_CALIBRATION_Y -11709 // the exact values can be found by issuing #define TOUCH_OFFSET_X -34 // marlin M995 command #define TOUCH_OFFSET_Y 332 #define TOUCH_ORIENTATION TOUCH_LANDSCAPE ``` Also hosted on GitHub https://github.com/qrti/q5_tft35