FLSun I3 Plus - Modular Electronics Box (WIP)

prusaprinters

<p>Work in progress</p> <p>My FLSUN i3 PLus became unmanageable after I added Raspberry Pi, Mosfets, TL Smoothers.</p> <p>I wanted to put all of the electronics in an enclosure and cool all of them.</p> <p>I decided to use a 120mm 12v fan (run @ 5v from MKS Gen L) on one side of the box with a grill at the other end. Each of the 4 sides holds each of the electronic components.</p> <p>All the electronics boards are secured with PC case screws, and the sides and fan with zip ties.</p> <p>I put some holes in the Raspberry Pi side so I could mount to the extrusion if I wanted to. I also filleted the mounting risers since I've experienced these parts breaking on other models. I also added notches and tabs to help everything align nicely. My led light strips are powered from Raspberry Pi USB port, Rasberrpy Pi is powered from 12 PSU via a buck converter @ 5.2v.</p> <p>I'm still not happy with cable management, I'll adjust as I get more appropriately angled usb cables. It's quite tight in there so I might have to extend the boards at some stage if I feel necessary, we'll see how it goes in use.</p> <p>Happy to adjust models for anyone who wants or has different boards.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Flsun i3 Plus</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.3</p></div> <p><strong>Infill:</strong></p> <p>30%</p> </p></p> Category: 3D Printers