Flowing Bird Tempel

pinshape

For a newer and improved version on my own website, go to https://www.designuitinspiratie.nl/golvende-vogel-tempel/ The Flowing Bird Temple is a feeder designed specifically for small birds. I printed this model in PLA with 0.2mm resolution and 0.4mm nozzle settings. The roof.stl part was printed using support material generated by Cura, which ensured that it could be easily assembled later on. After printing all the parts, I Super Glued them together, starting with the base parts, followed by the roof and wedge components. I also secured the M4x45mm bolt in place early on, as it would have been challenging to do so after assembling all the parts. To see how all the pieces fit together, please refer to the provided pictures. To assemble this model, you will need a few essential materials, which are listed below: 1. An M4x45mm bolt and nut 6 base.stl parts 6 entrance.stl components 2 mount pin.stl parts 1 mount ring.stl piece 1 mount wedge.stl part 2 mount.stl pieces 6 pillar 2L.stl parts 6 pillar 2R.stl components 6 pillar.stl elements 6 roof.stl sections If you have any questions or concerns about this project, feel free to ask. I'd be happy to help clarify any doubts. As for the design, I intentionally left a small opening in the middle of the base to allow rainwater to drain out.