Flower pot "castle"

cults3d

Print this nice flower pot which looks like an old castle tower. When filled with soil the top bricks look really big and solid although the lower wall of the pot is only 3 mm (0.12 inches) thick. The flower pot is 14.2 cm (5.6 inches) high and 7.5 cm (2.95 inches) wide. Please do not resize the model in your slicer, as the wall thickness is designed for the present size. No supports are needed. The flower pot "castle" comes in two flavours: Flower pot 14.2 cm with slots at the bottom side The pot has three slots at the bottom side to allow excess water to leave the pot. Best used with a bottom plate to collect excess water. Corresponding STL files: Flower pot castle 142mm V1.stl Flower pot castle 142mm bottom plate V1.stl Flower pot 14.2 cm without slots at the bottom side Flower pot with solid bottom side without slots. Water your plant carefully. Corresponding STL file: Flower pot castle no slots 142mm V1.stl The flower pot is best printed with PETG. You should have some experience with PETG before daring to print this object to avoid frustration. PLA is not suitable as sunlight and water may cause the PLA to start composting. Please note that the flower pot is quite large and weights about 280 g! If you print the bottom plate, it weights about 90 g. Enjoy printing this object.