"Flower of Fate" - Mechanical dice case

prusaprinters

The Flower Fate, contains 7 dice which determine the fate of many adventurers. Printing Instructions:For the most part i recommend pla, with a layer height of 0.2 mm, however some exceptions apply, these can be seen in file notes.Print the parts as shown in picture (see file notes for amounts)Step 0:make sure each part looks right, cut of any brim left overs / elefant's foot.This is especially important for the mechanical parts. Step 1:Glue lift_wheel_knob pegs into round holes in the lift_wheel.Step 2: Insert the 7 slide's in each channel of the housing:Step 3:  Put the lift_wheel with knob on top of channels in the  lift_wheel.make sure each peg on the slides are in the groves of the  lift_wheel.Test that the mechanism turns smoothly. Step 4:Add a bowl to a socket in the housing and put dice int. test the mechanism. repeat for all bowls.If stuff starts to snag during this process check the bowl you just inserted for ridges or other things that might get caught and try to fix using a exacto knife or small file.Step 5: Once all bowls have been inserted you can glue the trim in place. make sure not to glue mechanism. Try to limit the amount of glue. Please post your results! :)Happy printing!