Floating Shelf (Updated v2)

thingiverse

New Additions (v2.1) - See below for details Floating wall shelf I have updated the floating shelf to version 2 based on suggestions in the comments. - Wall mount posts are rectangle and the same width as the width of the bracket bottom - Printing on the side instead of upright increases the strength of the posts Dimentions 15mm x 90mm x 70mm 15mm x 90mm x 180mm 15mm x 90mm x 120mm <b>*See "Support" below for direct download to avoid Tip PopUp window*</b> If you would like this in a larger size, please let me know, I am happy to help. More Designs Here: https://www.thingiverse.com/davidgunzenhauser/designs Parts: V2.1 1) v2.1-Floating Shelf 120 - Shelf 2) v2.1-Floating Shelf 120 - Shelf Rounded 3) v2.1-Floating Shelf 120 - Bracket With this version I have added a new size, and an option for rounded corners. Note, the bracket will work for both of the v2.1 prints v2 1) Floating-Shelf V2 2) Floating-Shelf V2-Wall Mount 3) Floating-Shelf V2 180mm wide 4) Floating-Shelf V2 Wall Mount 180mm wide v1 1) FloatingShelf.stl This is the actual shelf. It simply slides onto the wall mount. No screws necessary 2) FloatingShelf.wallmount.stl This is the wall mount for the shelf. This will be mounted to the wall and the shelf will slide on 2 Screws are required 3.5mm x 30mm 2 wall mount anchors for screws Rafts: No Supports: No Printer: Ender 3 V2 Infill: 15% for Shelf 100% for wall mount - It is not necessary but will provide extra strength. The sample is printed at 15% and works just fine Filament brand: TINMORRY Filament color: White Filament material: PLA