Flite Test Simple Stick Fuselage
cults3d
This is a Flite Test Simple Stick 3D Printed Fuselage. The Fuselage is designed to be printed on a mid size Printer - 300mm X 300mm X 400mm. The files include the Fuselage - Front, Middle and Aft. Also included, are the main landing gear and a bracket for a steerable tailwheel. The fuselage is designed to fit any 35mm Diameter sized motor. I have flown this with a 35-36 1100 and 1800KV motors. The fuselage tail section has an arrow shaft that joins the Aft and Mid sections together. The Front and Mid Sections are held together with 3mm X 500mm Carbon Fiber Rod. There are two Hatches. One on top for the battery and one on the bottom for the 9G servos - not included. The fuselage parts are printed from ABS, but can be printed from other material - PLA or PETG. The landing gear can be bolted with 6mm nylon bolts or glued. The wing is intended to be hot glued onto the fuselage. The hatches require 8mm X 2mm magnets for a total of 8.
With this file you will be able to print Flite Test Simple Stick Fuselage with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Flite Test Simple Stick Fuselage.