Flipper Zero - CC1101 Board by TehRabbitt - Case

thingiverse

A quick case I put together to fit the CC1101 expansion board made by TehRabbitt. The board can be purchased on Tindie [here](https://www.tindie.com/products/tehrabbitt/flipper-zero-cc1101-expansion-board-by-tehrabbitt/). The board is designed to be used with the Flipper Zero, which can be found [here](https://flipperzero.one/). To assemble the case, you'll need two M2x10mm screws and two M2 nuts. This design also has a pin protector boot cover that can be found in the following locations: - https://www.thingiverse.com/thing:6123576 - https://www.printables.com/model/606839 - https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20CC1101%20Board%20by%20TehRabbitt%20-%20Case%20Pin%20Boot%20Cover My print settings: - Hatchbox PLA - 0.2mm layer height - 0.4mm nozzle (line width) - Enable retraction - Wall count 3 (+ print thin walls enabled) - Top/bottom layers: 4 - Infill density: 20% - Infill pattern: Cubic - Print temp 210 C - Bed temp 20 C - No supports needed See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing Enjoy!