
Flight Controller Soft mount (Dampening)
thingiverse
Flight controllers with M3 mount holes can be easily mounted using these dampeners, which eliminate any vibrations coming through the mounting screws and arms. The side with the hole goes on the nylon screws and the other side flips over to fit underneath the FC mounting holes. I haven't tested the flexibility with different materials yet, but TPU is the most suitable material to print with. Two different lengths are available: 20mm and 25mm. Versions of dampening exist: - Dampening v1 has one hole and one pin for a softer grip. - Dampening v2 has one hole and one bullet pin for better grip, making it harder. - Dampening v3 is similar to v2 but provides a softer grip. - The hardest version has two holes for using your own screws and nuts. Trim the pin down to fit the flight controller hole with sharp pliers if necessary. Please share your thoughts on this. Thanks. Print Settings: Printer: MakerBot Replicator Rafts: Any settings work Supports: Any settings work Resolution: 0.50 mm Infill: 100% Notes: Lower infill and higher resolution might also work. Recommended materials are TPU and NinjaFlex. Print four pieces.
With this file you will be able to print Flight Controller Soft mount (Dampening) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Flight Controller Soft mount (Dampening).