Flexible tablet hanger

thingiverse

They are printed by the DELTA 3-D printer, located at http://www.appropedia.org/Athena_Build_Overview. The chosen material is PLA with a diameter of 1.75 mm from Hatchbox, a fill density of 30%, and print speeds set to 30 mm/s. Layer height is optimized at 0.2 mm, shell and bottom/top thickness is set to 1 mm. To complete the build, two pieces for corner tops and two pieces for corner bottoms must be printed. Additionally, two bar connector v2 units and one bar connector v2-1 unit need to be printed. For assembly, a screw from http://www.thingiverse.com/thing:193647 may be utilized. A meter of ribbon will be required, along with four M4 x 45mm socket head cap screws and two M4 x 25mm socket head cap screws. To use the flexible tablet hanger effectively, tie all four corners together using the ribbon. Alternatively, connect left and right corners for top and bottom using a connector. Use the ribbon for hanging purposes.