Flexible Standoffs for Soft Mounting Flight Controller
thingiverse
I previously tried hard mounting one of my flight controllers with standard metal spacers and O-rings to eliminate some unwanted yaw shake that couldn't be calibrated out. It didn't appear to make a difference, so I decided to try printing some in HobbyKing flexible filament (NinjaFlex is too firm) and it took care of my yaw shake right away. I also used slices of harder silicone fuel tubing instead of O-rings since it is stiffer. They are not threaded but the holes are small and stiff enough that M3 screws thread into them easily. I recommend squeezing each spacer with some pliers a few times to harden them up a bit. There are 8mm, 10mm, and 12mm heights with 6mm ID and 2.9mm OD for M3 screws to choose from. Hopefully this will help others with similar issues. Print Settings Printer: Wanhao Duplicator i3 V2 and V2.1 Rafts: No Resolution: 0.2mm Infill: 100%
With this file you will be able to print Flexible Standoffs for Soft Mounting Flight Controller with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Flexible Standoffs for Soft Mounting Flight Controller.