Flexible coupling for Anycubic i3 mega z-axis

prusaprinters

<p>This is a flexible coupling I designed for the Anycubic i3 mega to connect the threaded rods and the z-motors, because I had some issues with z-wobble. I replaced the rigid couplers with these ones, to compensate imperfections of the threaded rods.</p> <p>To attach the couplers you need four DIN 934 M4 nuts (more or less the standard nuts). For attachement of the threaded rods you can use the headless screws of the rigid couplers. For the motor side with 5 mm bore you need longer m4 screws. On the right side of the printer, where the z-endstop switch is, you should use the headless screws of the rigid couplers on the upper side. If you use longer screws, that do not fit completely into the coupler the may collide with the endstop switch.</p> <p>The couplers are quite flexible against bending in any direction and work like a spring the z-axis direction, but they are very stiff to torsion around the z-axis.</p> <p>The coupler has a side with a 8 mm bore and a 5 mm bore. I think, it might also be useful for other printer models.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>Anycubic i3 mega</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0,2 mm</p></div><strong>Infill:</strong></p> <p>100%</p> <h3> <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I printed the coupling upright with no supports. The spring part is not very pretty, but it worked very well on my machine. The spring part should also be printed quite slow because of the massive overhangs.</p></div> Post-Printing</h3> <p>Insert four DIN 934 M4 nuts. Put four screws through the holes, so that the nuts do not fall out, while you attach the coupler to the printer.</p> </p></p> Category: 3D Printer Accessories