Flex ATX DC power cover

prusaprinters

<p>Designed a cover for a Flex ATX slot on 1u and 2u servers. This can be great if you are converting a 1u server into a custom case.&nbsp;</p><p>&nbsp;</p><p>The screw holes are tightly M3. Meaning you could just thread a machine screw through and it should grip. I did this but also put on nuts to be sure. While the DC port hole is 10mm for the most common 5.5 x 2.5 dc plugs on Amazon. Hole should be a little tight just like the M3 screws so you may need to use a pair of pliers to screw the DC port all the way in. But it should not come out :D</p><p>&nbsp;</p><p><strong>NOTE</strong>: There is a bump on the back of the dc port to add some grip on the primary file to help depending on the dc port you use. Be sure to flip the cover to the flat side else you might print all goop.&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>I printed this out on some generic brand PLA on my Prusa Mini+.</p>