FlashForge Creator Pro Ultimate Tool Caddy

thingiverse

I designed my own tool caddy because most of the other ones available didn't meet my needs. It features five holes that accommodate my matching set of Allen drivers, including three sizes and a small flat blade driver, which can disassemble the FF Creator Pro completely. One hole is reserved for a plastic reamer to clean or enlarge holes slightly. The tool caddy also has spots for cutters, a dial indicator, four drill bits, three SD cards, and a spatula for removing prints. Additionally, there are five hooks on the side where you can hang various items. This tool caddy hangs from the handle of an FF Creator Pro inside, much like some other models. It doesn't require any supports when printed on a FF Creator Pro and takes about four hours to complete, depending on your settings. I used 0.2mm resolution with 25% infill and a print speed of around 3400 mm/s. Simplify3D was my chosen slicing software. Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: .2 Infill: 25% Notes: I used Inland brand silver PLA, ABS might be more suitable for this model but it shouldn't get too hot since most of the tool caddy is outside the printer.