Flashforge Creator Pro reel spindle holder

thingiverse

Reel holder spindles for FlashForge Creator Pro printers allow use of filament reels with 1.5", 52 mm, and 55 mm ID hole sizes. Filament reels with ID holes that are either too small or oversized won't fit properly. Adapters shown in the pictures are currently inverted but this is an error; correct orientation should be reviewed by referencing the last page of a related PDF document. Print Settings for this part are listed below: Printer model: FlashForge Creator Pro Yes, it does generate rafts during printing It doesn't have built-in support material. However, the option might not matter given that the infill density will reach its maximum value. Resolution is set at 0.3 mm. Filament will fill 100% of available space during the object printing process. Other information about print setup may be viewed on the final page of the provided PDF document. Post-Printing Additional guidance on how to manage the post-printing procedures is explained on page two of the accompanying PDF guide. Image description: These reel holder spindles are combined with a 55 mm OD adapter for lock-up purposes. Detailed component. Three items are necessary for assembling these reels; screws, nuts. Screws used should be six thirty-seconds flat heads. Length has to comply to specifics described in PDF guide. Another printed detail that will provide support between baseplate and main spindles during printing. Hook detail. In the correct form