Flashforge Creator Pro Dome hinge

Flashforge Creator Pro Dome hinge

thingiverse

Hello! I'm building a hinge for the dome of my Creator Pro, and I had to get creative since I was tired of constantly moving it around. The design requires blocks to support the weight of the dome itself, which presented a challenge. To address this issue, I applied double-sided tape to secure them firmly to the printer bed. Next, you'll need to carefully drill holes through the plastic dome – be cautious not to crack it! You may also want to use a Dremel or saw to trim off the corners of the rear panel on the dome. For assembly, I used M3 metric screws throughout. The hinge itself was printed at 50% infill and a 0.2 layer height. The blocks were printed with 10% infill and the same 0.2 layer height.

Download Model from thingiverse

With this file you will be able to print Flashforge Creator Pro Dome hinge with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Flashforge Creator Pro Dome hinge.