FlashForge Creator Pro Cooling Fan Duct - No Frills, Flexion compatible

thingiverse

### Purpose This is a straightforward cooling fan duct designed for the FlashForge Creator Pro, which also works with the Flexion HT print heads that have limited clearance. The duct can be printed without any pre-existing cooling fan and can easily be cleaned up with minimal effort required. No supports are necessary. ### Additional parts for cooling fan duct * A 4010 (40mm x 10mm) cooling fan is needed, which requires a 24v power supply suitable for the FlashForge Creator Pro. This fan typically operates at 6000+ RPM and consumes 0.1A. * Four M3 18mm bolts are required * Four M3 nuts are necessary * A connector that matches the fan cable is also needed; I used a JST SYP 2.54mm Female crimp-style connector (available through Amazon as B0188YKCFC) ### Parts required for wiring the fan for the first time * Suitable wiring, such as 22awg black/red cable, must be obtained (I purchased this through Amazon as B00QTCBZ4I) * Connectors to attach to the fan near the print head so that it can be removed are also needed * Nylon zip ties are necessary to replace any that need to be cut; I used 8 inch black nylon zip ties * The FlashForge Creator Pro requires 5.08mm 2-pin screw terminal blocks, which I purchased through Amazon as B01MG4FC6E