Flamewheel f450 Anti-Vibration Raspberry Pi 3 and Navio 2 Mount

thingiverse

This vibration dampening mount is engineered to securely attach a Raspberry Pi 3 and a Navio 2 to a DJI Flamewheel F450 without requiring any drilling or modification of the base plate. The unique design of the casing completely nullifies the vibration generated by the motor, resulting in increased stability during flight. Furthermore, the design enables users to effortlessly remove the Raspberry Pi 3 if needed. UPDATE: The holes on the naviocase were not extruded far enough, so you will need to drill out two holes with a drill bit. Post-Printing Parts Needed -20 x M2.5 10 mm bolts https://www.amazon.com/Machine-Finish-Phillips-M2-5-0-45-Threaded/dp/B00F33S93E/ref=pd_bxgy_328_2?_encoding=UTF8&pd_rd_i=B00F33S93E&pd_rd_r=9DD8JJYCEEWCDESMG9JQ&pd_rd_w=jS9M2&pd_rd_wg=iFs7P&psc=1&refRID=9DD8JJYCEEWCDESMG9JQ -Super Glue -Velcro Strap or Zip Tie to Attach Components Together -8 x Blue Vibration Balls https://hobbyking.com/en_us/vibration-damping-ball-65g-bag-of-8.html Directions 1) Insert the dampening balls into the Flamewheel platform (use superglue for increased reliability) 2) Attach the four feet to the dampening balls (use superglue for increased reliability) 3) Bolt the feet down so that the corners are secure (use loctite for increased reliability), being careful of the front and side orientation 4) Attach the Pi and Navio together using screws provided with the Navio 5) Attach the Pi and Navio to the bottom part of the Pi case using four screws 6) Attach the Navio lid onto the Navio case 7) Place the Pi and Navio on the platform 8) Use a velcro strap or zip-tie to hold both parts securely together