Flail / MorningStar

thingiverse

----- <b>Flail - Morning Star</b> ---- Tried to craft a Flail / MorningStar. I sliced it with Simplify3D software. Everything was printed at 0.20 layer height (infill 100%). except for... Shaft 0.24 layer height (infill 10%) Sphere 0.24 layer height (infill 100%) You need to print: 2x Spheres (Outline/Perimeter Shells 4-5 minutes) 18x Spikes 1x the rest The "Sphere centering ring" is optional, I found it easier when gluing Sphere halves together. The Chain is not mine; it's from "Chain Generator" here on Thingiverse. Start printing the Chain. Then print the "Chain Lock" and insert one end of the Chain during the print. Then print the "End Cap Top" this time inserting the other end of the Chain. Print the rest and glue together Sphere halves and Spikes. This is how I printed mine. If you have any questions, please feel free to ask. NB. The best glue for PLA is "Loctite super glue GEL" (my opinion). See my other designs <a href="https://www.thingiverse.com/Jubaz/designs/">HERE</a>.