fixed_rod_for_blue_spool

thingiverse

Using the following settings: Outer Diameter: 14 mm Drive Type: Socket Drive Wing Ratio: High Wing Ratio (1) Non-Threaded Outer Diameter: Off (0 mm) Thickness: Medium Thickness (2 mm) Step Shape Degrees: Medium Steepness (45°) Drive Diameter: Small Drive Diameter (5 mm) Nut Thread Step: Medium Tightness (2 steps per 10 mm) Nut Step Shape Degrees: Medium Steepness (45°) Thread Outer Diameter: Standard Size (8 mm) Inner Diameter: Matched with Thread Diameter (8 mm) Counter-Sinks: Lightly Countersunk (2 passes) Facets: Fine Finish (6 facets) Nut Height: Average Length (6 mm) Nut Resolution: Fine Details (0.5 mm) Thread Step: Small Steps (1.25 mm) Nut Diameter: Large Nut Diameter (12 mm) Texture: No Texture Added Thread Length: Long Threaded Section (135 mm) Non-Threaded Section: Off (0 mm) Head Type: Hex Head Type: Rod (Rod-type Part) Slot Width: Standard Slot Width (1 mm) Head Height: High Head Height (5 mm) Nut Type: Standard Nut (Normal) Slot Depth: Average Slot Depth (2 mm) Resolution: Fine Details (0.5 mm) Resulting 3D-Printable Design Settings: Type: Custom Rod Part Thread: Custom Thread Specifications Instructions: Please use the specified options when printing your custom design: Use an Outer Diameter of 14 mm for best results. For socket drives, a drive diameter of 5 mm will provide a snug fit. Increase the Wing Ratio to 1 for added stability and security. Keep Non-Threaded Sections to zero (0) unless required. Use Medium Steepness settings at Step Shape Degrees. Adjust drive dimensions according to requirements. Final Design Settings: