Fixation for magnet board "blomus MURO"

prusaprinters

<p>Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home.<br/> But there is only one drawback:<br/> The board is mounted with 2 screws on the top only.<br/> Pushing away a strong magnet lifts the bottom of the board from the wall.</p> <p>So I decided to design a locker to fix it on the bottom side as well. It should be an aesthetic (means: invisible) solution.</p> <p>The designed fixation is mounted behind the board and can be opened and closed with a screwdriver. When printed with black material, it is almost invisible.</p> <p>My boards are 40x80cm. I assume that the fixation may work for other sizes as well. But obviously only for the perforated ones.</p> <p><em>Needed material:</em></p> <ul> <li>2x screws 4 x 50mm </li> <li>2x wall plug 6mm</li> </ul> <p><strong>History</strong></p> <p><em>Version 0.1.0</em><br/> *First published version and currently in use.</p> <h3>Print instructions</h3><p><strong>Rafts:</strong> Doesn't Matter<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> 0.3mm<br/> <strong>Infill:</strong> 100%<br/> <strong>Filament:</strong> PLA is fine</p>