Fixation bowden

youmagine

The entire set consists of the base that comes to sit on the original head, fixed by the four screws, the catch that includes the entire cable clamp and clip from the origin and which comes to position itself in the right place on the tube, the locking lever that comes to immobilize the catch relative to the head. INTEREST OF THE MODIFICATION: The clip remains solidly attached to the tube and does not wear it down as it turns freely. The tube is visually and automatically positioned correctly with respect to the print head. Separation of the tube from the head is easier. The top, bottom, and shell are 0.8mm thick, 30% filled. The brim is not necessary. The catch and lever must be printed in double in case of double nozzle printing. The lever must be turned over on its small side. The two levers are identical. The catch must be printed with support everywhere. The two catches are identical. ASSEMBLY: Install the base on the head using the four original screws. Place the tube clamp in the catch and then slide the entire assembly onto the tube to the correct position. Secure the assembly with the clip.