five four

thingiverse

Created with Customizer! Options Used: • GoPro Bar Rod Diameter: 54mm • Secondary Rotated Position: Not used (Set to 0) • GoPro Rod Nut Outside Diameter: 8.05mm • Secondary Use: Clamp (Not applicable in this model) • Primary Use: Double Screw Pattern • GoPro Bar Screw Diameter: 6mm • Extra Thickness: 3mm • Captive Rod Inner Diameter: 3.8mm • GoPro Rod Nut Thickness: 3.6mm • Gap Between GoPro and Clamp Bar: 2.4mm • GoPro Bar Thickness: 5mm • Captive Protruding Height: 0.5mm • Extra Length (Optional): Not used (Set to 22mm) • Bar Screw Shoulder Diameter: Not applied in this configuration Assembly Instructions: Place the GoPro into the custom bar clamp, aligning it with the screw holes on top. Screw the secondary rotatable nut onto the go pro primary by applying force while maintaining a correct rotation angle Secure with the secondary fastener at desired orientation. Make sure everything fits properly and check all parts to be sure no parts stick together.