Fisher & Paykel DishDrawer Drain Hose Loop Clamp

prusaprinters

<p>A drain hose loop clamp for Fisher &amp; Paykel dual-drain hose DishDrawers, US/Canada models. Good if you can't use their supplied one due to space.</p> <p>DishDrawers have some specific height requirements for the drain loop, and the supplied clamp assumes that you have some extra space to work with. If you've got cabinets like mine (IKEA) you might find that the supplied clamp won't reasonably fit. These are designed to be low profile but still hold the hose tightly.</p> <h3>Print instructions</h3><p>Printed in PETG at 0.20mm to get reasonable detail on the ribs that hold the hoses in place.</p> <p>See the attached photo for some idea about how you might install; in my case, I needed to get the 29" or so height out of the drain loop, but still get to my drain without a sag in the hoses. I chose to drill two holes in the top of the cabinet, to loop the hoses up behind the sink and to the recommended height.</p> <p>The print itself is very boring: PETG for some flex since the hoses snap in. Put it on the build plate and go.</p> <p>If you need to modify the print, the <a href="https://a360.co/37z9dcv">Fusion 360 model</a> is available. It's parametric and should be relatively modifiable, although I made some late-breaking decisions when designing that makes the model a <em>little</em> wonky.</p>