Fish finder sonar holder

thingiverse

My friend asked me to make fish finder sonar support for an OpenSCAD model. Here's the updated settings: Printer: Folgertech 2020 i3 modified Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 70% Notes: ; bed_temperature = 60 ; before_layer_gcode = ; bridge_acceleration = 0 ; bridge_fan_speed = 100 ; brim_width = 3 ; complete_objects = 0 ; cooling = 1 ; default_acceleration = 0 ; disable_fan_first_layers = 1 ; duplicate_distance = 6 ; extruder_clearance_height = 20 ; extruder_clearance_radius = 20 ; extruder_offset = 0x0 ; extrusion_axis = E ; extrusion_multiplier = 1 ; fan_always_on = 1 ; fan_below_layer_time = 60 ; filament_colour = #FFFFFF ; filament_diameter = 1.75 ; first_layer_acceleration = 0 ; first_layer_bed_temperature = 60 ; first_layer_extrusion_width = 170% ; first_layer_speed = 15 ; first_layer_temperature = 220 ; gcode_arcs = 0 ; gcode_comments = 0 ; gcode_flavor = reprap ; infill_acceleration = 0 ; infill_first = 0 ; layer_gcode = ; max_fan_speed = 100 ; max_print_speed = 75 ; max_volumetric_speed = 0 ; min_fan_speed = 100 ; min_print_speed = 10 ; min_skirt_length = 0 ; notes = ; nozzle_diameter = 0.3 ; only_retract_when_crossing_perimeters = 1 ; ooze_prevention = 0 ; output_filename_format = [input_filename_base].gcode ; perimeter_acceleration = 0 ; post_process = ; pressure_advance = 0 ; resolution = 0 ; retract_before_travel = 2 ; retract_layer_change = 1 ; retract_length = 4 ; retract_length_toolchange = 10 ; retract_lift = 0 ; retract_restart_extra = 0 ; retract_restart_extra_toolchange = 0 ; retract_speed = 40 ; skirt_distance = 6 ; skirt_height = 1 ; skirts = 1 ; slowdown_below_layer_time = 5 ; spiral_vase = 0 ; standby_temperature_delta = -5 ; start_gcode = G28 ; home all axes M106 ;FAN ON ; temperature = 185 ; threads = 2 ; toolchange_gcode = ; travel_speed = 75 ; use_firmware_retraction = 0 ; use_relative_e_distances = 0 ; use_volumetric_e = 0 ; vibration_limit = 0 ; wipe = 0 ; z_offset = 0 Post-Printing: Remove support.