Fire truck with ladder toy fully 3D printable 3D print model

cgtrader

DescriptionThis is a fire truck toy, based on the same truck model as the concrete mixer and the tank truck models. Fully printable, no support (except ladder), one material/colour printer. All parts should fit on a 20x20cm print bed. Assembly video-tutorial: https://youtu.be/EwvFrpBn-Vw The tolerance for pieces that need to fit tightly is 0.1mm, for pieces that need to allow movement (like screws and axles) 0.3mm or more. Printing list: Nb. STL file name rezolution support colour (my make) 1x axle_back.stl 0.16mm no red 1x axle_front.stl 0.16mm no red 0x back_light.stl 0.16mm no 2x back_light_with_flat_cut.stl 0.16mm no orange 1x back_light_with_flat_cut.stl 0.16mm no white 1x back_light_with_flat_cut.stl 0.16mm no red 1x back_plate_09_fire_truck.stl 0.12mm no black-whit 2x base_dist.stl 0.16mm no orange 1x base_ftruck_left.stl 0.16mm no orange 1x base_ftruck_right.stl 0.16mm no orange 1x cabin_back_body.stl 0.16mm no red 1x cabin_fire_truck.stl 0.16mm no red 0x cabin_ft_your_own_support.stl 0.16mm yes 1x cage.stl 0.16mm no red-orange-gray 1x cage_art_die.stl 0.16mm no orange 1x cage_axle_l38.stl 0.16mm no orange 2x cap_double_rim.stl 0.16mm no blue 6x cap_double_rim.stl 0.16mm no orange 2x cap_single_rim.stl 0.16mm no white 4x cone_road_sign.stl 0.16mm no white-orange 1x fire_truck_ladder_axle_l48.stl 0.16mm no orange I 1x floor_short.stl 0.16mm no white 1x front_grill_09_fire_truck.stl 0.12mm no black-red-black 1x front_lights.stl 0.12mm no blue 1x interieur.stl 0.16mm no gray 1x interieur_base.stl 0.16mm no orange 1x ladder_art_p1.stl 0.16mm no orange 1x ladder_art_p2.stl 0.16mm no orange 1x ladder_art_p3.stl 0.16mm no orange 1x ladder_base.stl 0.16mm no red 1x ladder_base_articulation.stl 0.16mm no orange 4x leg_ext_part.stl.stl 0.16mm no orange 4x leg_int_part.stl.stl 0.16mm no orange 1x ladder_in_out.stl 0.16mm no gray 1x mirrors 0.12mm no black(TPU) 2x rim_double.stl 0.16mm no white 2x rim_single.stl 0.16mm no white 3x roof_light.stl 0.16mm no blue 1x screw_gear_knob.stl 0.16mm no black 2x screw_l6mm.stl 0.16mm no blue 13x screw_l9mm.stl 0.16mm no black 4x screw_l9mm.stl 0.16mm no white 6x screw_l13mm.stl 0.16mm no orange 1x side_door_left.stl 0.12mm no gray 1x side_door_right.stl 0.12mm no gray 0x sleeping_screw_l9mm.stl 0.16mm no 0x sleeping_screw_l13mm.stl 0.16mm no 1x steering_wheel.stl 0.16mm no black 4x tire_outter_cut.stl 0.16mm no black(TPU) 2x tire_simple.stl 0.16mm no black(TPU) 1x wheel_house_back_ft_left.stl 0.16mm no red 1x wheel_house_back_ft_right.stl 0.16mm no red 1x wheel_house_front_left.stl 0.16mm no white 1x wheel_house_front_right.stl 0.16mm no white Observations: all objects already have the intended print direction in the STL files! front_lights - if these don't fit, scale them down in your slicer 2-3-4% until these fit for the cabin_with_support.stl enable thin walls if you don't like the built in supports for the cabin, then you can find only the cabin in cabin_your_own_support.stl most of the parts were printed with PLA. only the tires and the mirrors were printed from TPU (flexible material) screws... there are also sleeping screws STLs included these are printed on the side which makes them a lot stronger the drawback is that these don't close the holes completely... So use as many sleeping screws as you can if the toy is going to be played with, and only normal/round ones otherwise multi-colour-parts are printed with the same one material/colour printer, the multi-colour effect is obtained by changing the material during the print truckfiretruckfirefightertruckstoytoysladdermechanical3dprintprintfullyprintableprintableassemblydiydiyprojectcarsvehiclegamesgames toyskidskids toystoy truck