Fimi X8 SE - Drone and RC Box

thingiverse

To close the case you need to print: - Bottom_V1: 4x Main Block and 4x Block Arm - Bottom_V2: 2x Main Block and 2x Block Arm Use a piece of filament for the hinge pins, or use nails or metal rod. Designed as a 2mm hole, so anything about 1.8 after accounting for printer tolerances. To fix the handle I used 2 M5x10mm ISO 7380-1 screws and 2 M5 nuts. To keep the drone and RC still, I put some foam inside the box, as you can see from the images. The Fimi_X8_SE _-_ Bottom _-_ v1.stl has the possibility to add an additional box below, I have designed two versions, one that houses 2 batteries (the batteries must be inserted on the side with the electrical contacts facing inwards) and a version empty so you can enter what you want. **Happy printing!** ==================================================================== If you have a FIMI X8 SE / FIMI X8 SE 2020 you may also be interested in: - Box for the only drone: https://www.thingiverse.com/thing:4379406 - Box for drone and RC: https://www.thingiverse.com/thing:4580561 - Box for spare propellers: https://www.thingiverse.com/thing:4575055 - Box for filters: - Filter holder: https://www.thingiverse.com/thing:4574370 - TPU battery box: https://www.thingiverse.com/thing:4599146 ====================================================================