FILTER PLUG

prusaprinters

<p>INTRODUCTION: THIS IDEA WAS DEVELOPED THINKING ABOUT PEOPLE WHO ARE UNDER PREVENTIVE AND MANDATORY SOCIAL ISOLATION (ACCORDING TO THEIR NAME IN ARGENTINA) AND WHO HAVE A 3D PRINTER AT HOME.</p> <p>ORIGIN OF THE IDEA: THIS IDEA WAS BORN DUE TO THE CONCERN OF A PARTNER, WHO CAN NEVER KEEP THE TUBE CLEAN BECAUSE THE FILTER IS TOO LARGE.<br/> INFORMATION SEARCH: BEFORE WE CAN BEGIN THIS IDEA, WE MUST INVESTIGATE THE FILTER MEASURES AND THE EXISTING INCLINATION ANGLE FOR IT WORK PERFECTLY.<br/> DESING: IN ORDER TO BE ABLE TO CREATE THE DESIGN, A VIDEO CALL WAS MADE IN WHICH EACH MEMBER OF THE SCIENCE CLUB DESIGNED A SKETCH OF THE IDEA TO SEE WHICH WAS THE MOST CONVENIENT AND THE MOST APPROPRIATE. THE DESIGNS WERE MADE IN FUSION 360.<br/> IT MUST BE HIGHLIGHTED THAT THE MOST USED MEASURE IN ARGENTINA IS 2´´ (TWO INCHES). SO IF IT CHANGES ACCORDING TO THE COUNTRY, IT IS RECOMMENDED THAT BEFORE CHANGING THE ENTIRE DESIGN, YOU SHOULD CHANGE THE SCALE OF THE DESING.</p> <h3>Print instructions</h3><p>3D PRINTING: IT IS RECOMMENDED TO USE THE FOLLOWING PARAMETERS (IT IS IMPORTANT TO CLARIFY THAT THEY MAY VARY ACCORDING TO THE BRAND AND MODEL OF THE PRINTER):<br/> LAYER RESOLUTION: 0.2mm<br/> WALL THICKNESS: 1.2mm<br/> FILLING: 50%<br/> PRINT SPEED: 70mm/seg<br/> NOZZLE TEMPERATURE: 210 ° C<br/> HEATED BED TEMPERATURE: 70 ° C<br/> IT IS ALSO NECESSARY THAT THE FILAMENT MANUFACTURER RECOMMENDS BETWEEN 60 ° C AND 80 ° C OF HOT BED AND BETWEEN 180 ° C AND 220 ° C OF TEMPERATURE IN THE NOZZLE. ALSO THE IMPLEMENTED PRINTER WAS A TRIMAKER COSMOS ll (MADE IN ARGENTINA)</p>