Filler - Sample Spool Brace for 3030 Profile (Offset Remix)
prusaprinters
<p>This is a simple remix of kino90's Filler - Brace for 2020 profile. I had to remix it because I printed cable chains to use on my Prusa Mini, but found that the mount would interfere with the path of the X-axis chain near the top. To solve this, I just offset the mount 6mm to the right, so that the left edge is even with the front edge of the rail.</p><p>I am using this mount on my Prusa Mini to attach the Filament Sample Spool Holder by FilamentColors.xyz (www.prusaprinters.org/prints/38041-prusa-mini-sample-spool-holder) to the vertical 3030 rail. I also remixed that holder to make it tall enough to clear the addon run-out sensor holder arm.</p><h3>Print Settings</h3><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>Yes</p><p><strong>Resolution: </strong>200</p><p><strong>Infill: </strong>20</p><p><strong>Filament: </strong>PLA <br> </p><p>You'll also need:</p><ul><li>2x M5x10 cap head screws</li><li>2x M5 3030 T-nuts or printable: www.thingiverse.com/thing:3663001</li><li>Expandable Filament Sample Spool: www.prusaprinters.org/prints/36621-expandable-sample-spool-holder</li><li>Sample Spool Holder Arm original: www.prusaprinters.org/prints/38041-prusa-mini-sample-spool-holder</li><li>or my Tall Remix: www.thingiverse.com/thing:4899152</li></ul>
With this file you will be able to print Filler - Sample Spool Brace for 3030 Profile (Offset Remix) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Filler - Sample Spool Brace for 3030 Profile (Offset Remix).