FilAngle

thingiverse

This DIY device was created using 1/2" PVC and an oscillating tool to cut it into specific lengths. The structure consists of three short cross-pieces, two short pieces at the front, and four long pieces for sides and back. It requires six T-joints and two L-joints (or T-joints) for assembly. To assemble, start with the front by joining short pieces with L- and T-joints to form a rectangle shape. Next, attach two long pieces to the open ends of the T-joints, followed by adding two more T-joints with their ends pointing up. Assemble the remaining long pieces, a short piece, and two T-joints into a tall "H" shape for the backrest. Push this H-shape into the bottom T-joints to secure the structure's position. Place a tight loop of blue painter's tape around the front short pieces and rest the Filastruder on it. Adjust the fan and arms for proper filament extrusion. For transportation, disassemble by detaching the H-shape from the bottom T-joints and pack the U-shapes with the Filastruder inside.