Filamentbox v1

prusaprinters

<p>This is a printable filamentbox with ball bearing brackets and an optional space for desiccant.</p> <p>The windows are made out of PET-foil with 0.75 mm thickness.</p> <p>Box6 print it uside down for a better result.</p> <p>Material:<br/> 1x screw M10x75<br/> 1x hexnut M10<br/> 2x ballbearing 6000RS</p> <p>This box is designed by my good friend mstark_wbg (<a href="https://www.thingiverse.com/mstark_wbg/designs">https://www.thingiverse.com/mstark_wbg/designs</a>)</p> <p>There is a new version 2 availible with an imprinted window and some optimizations. <a href="https://www.prusaprinters.org/prints/45401-filamentbox-v2-with-imprinted-window">https://www.prusaprinters.org/prints/45401-filamentbox-v2-with-imprinted-window</a></p> <h3>Print instructions</h3><p>I printed it in PETG with 0,25mm layer height. The area containing the thread should be 0,20mm due to quality.<br/> Use Supports on needed areas (outgoing material tube etc.)</p> <p>You have to change the value of the bed size and origin to get it printed on a MK3S (see attached pictures).<br/> Bed is sized to x:250 and y:217 where the origin is x:0 and y:5</p> <p>Box3_Bracket needs to be printed in 0,20mm layer height and without "detect bridging perimeters". If not deselected you are not able to brake the wings free.</p> <p>.3mf file is added for Box1_window_drying, Box2_window, Box3_bracket (MK3S - Mosq Magnum)</p> <p>Be aware that GCodes are only for Mosq Magnum on MK3S with PETG.</p>