Filament Spool Holder

prusaprinters

<p>Filament spool holder. Print setting main body i used 0.12mm layer height. Caps and roles 0.2mm or 0.25mm layer height and Infill 20% for all.</p><p>Print time main body 3 hours 100mm/s.</p><p>Caps and roles booth round 3 hours at 50mm/s.</p><p>4 x ball-bearings = 8x22x7mm<br>4 x washers = 8.5x15mm</p><p>Press the bearings in the roles, put the washers between every bearing and the main body and press the caps from outside through the main body in the roles.<br>If you have worked properly, the ball bearings and the caps will be very tight.</p>