Filament Sample Rolling Index

prusaprinters

<p><strong>Update: </strong>Version 2 is now out. The cards now print in 12 minutes instead of 15, and have clearer tabs. You will need the new holder to fit them. I have redesigned version 1 cards for those that already have the holder printed in the below 3mf, version 1.5 and version 2 are not compatible with each other!</p><p>Your rolling Index for cards includes a holder and easy to remove cards in so many many filament types! A holder can support up to 50 cards.</p><p>Each card has a tab stating the material type, as well as a spot to write information down. Plus you get a nice honeycomb with different thicknesses for flow testing. Parts print quickly and can be inserted from the front or back of the stand.</p><h3>Print Recommendations</h3><p>Holder: 0.15mm - 0.2mm layer height defaults. Print in orientation provided to have smoother rails, can be printed bottom flat though will be a little rougher.</p><p>Cards: 0.1 mm layer height defaults.</p><h3>Included Cards</h3><ul><li>PLA</li><li>PETG</li><li>ABS</li><li>ASA</li><li>FLEX</li><li>HIPS</li><li>EDGE</li><li>NGEN</li><li>PVA</li><li>PC</li><li>PP</li><li>PA</li><li>PVB</li><li>PET</li><li>CPE</li></ul>