Filament sample cards

thingiverse

----------SAMPLES---------- -I edit de sample in www.tinkercad.com and i put the following information (you can watch how i edit the sample in https://www.youtube.com/watch?v=BVRcENUM9lo&t=4s): >Type of filament >Brand of the filament >Color >Temperature >Size of nozzle >Optional: if you dont like my logo, you can delate it by adding some solid figure with 1.2mm height -You only have to do this once. If you want to have another sample of a different color, brand or type, you only have to open the file again in tinkercad and change only the information you need -The design has a little hole so you can pass a thread in case you don't want to print the samplers -IMPORTANT: You must put all those information so the height of the finished card is equal to 2.2mm (so it can fit in the sample holder) ----------SAMPLE HOLDER---------- -I designed expandable sample holders because it's easy and fast to print and you can increase the capacity of them by adding another one in the previous one (as shows in one of the picture) -RECOMENDATION: I had to print the sample holders with -0.1mm horizontal expansion so they can fit eachother (but this parameter depends on each printer)