Filament guide for Prusa i3

prusaprinters

<p>A common problem during printing is tangle of the filament, which may cause jams or pull up the filament from the extruder while printing.</p> <p>This guider will keep the filament in place while printing. The holes are big enough to allow uninterrupted moving of the filament, but also small enough to prevent further untangle of the filament from the spool.</p> <p>Once printed, the guider fit easily and snugly at the bottom of the spool holder that comes out of the box.</p> <p>Version 1.2</p> <ul> <li>Single hole - R1.95mm - D3.9mm</li> </ul> <p>Version 1.1</p> <ul> <li>Double sided - R1.50mm - D3.0mm</li> <li>Double sided - R1.95mm - D3.9mm - suitable for bowden fitting M4.0mm</li> <li>Double sided - R2.00mm - D4.0mm - suitable for bowden fitting M4.0mm</li> <li>Double sided - R3.00mm - D6.0mm</li> </ul> <p>Version 1.0</p> <ul> <li>Single sided - R0.90mm - D1.8mm</li> <li>Double sided - R0.90mm - D1.8mm</li> </ul> <h3>Print instructions</h3><h3>Category: 3D Printer Accessories Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.1</p> <p><strong>Infill:</strong> 10%</p> <h3><strong>Filament:</strong> Prusament PETG Orange Post-Printing</h3> <p>Use a round pliers or a rod to clear the holes and wide them, if needed</p>