Filament feed tube merger 6mm

prusaprinters

<p>This is a remix from Robinder's tube merger <a href="https://www.thingiverse.com/thing:3676326">https://www.thingiverse.com/thing:3676326</a></p><p>I built a 3 spool dry box with oversized feed tubes (OD=6mm, ID=4mm). This remix merges 3 tubes instead of 4 from the original design.</p><p>Printed mine with 6.3mm hole diameter for the feed tube but the tube was loose inside the exit hole. Redesigned with 6.2mm hole so hopefully it fit better.</p><p>Can be printed without support.</p><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>Ender 3 v2</p><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Resolution:&nbsp;</strong></p><p>0.28</p><p><strong>Infill:</strong></p><p>25%</p><p><strong>Filament:</strong></p><p>Smith3D PLA+ / PLA Pro</p><p>Light Blue</p><p>&nbsp;</p><p><strong>Notes:</strong></p><p>0.4mm nozzle.</p><p>Printed with CHEP's FF fast 0.28 profile.</p><p>You can print with normal speed at 0.2 layer height and more infill if you want</p><p>&nbsp;</p><h3>Custom Section</h3><p><strong>Option #1: Filament spool rod hanger</strong></p><p>The hanger is a design remix to fit OD=43mm pvc tube to be used with button head screws.</p><p>Hardware required:</p><p>m4 x12mm button head screws x6</p><p>m4 nuts x6</p><p>Print without support.</p><p>The file to this thing can be found here: <a href="https://www.printables.com/model/222161-filament-rod-43mm-hanger">https://www.printables.com/model/222161-filament-rod-43mm-hanger</a></p><p>&nbsp;</p>