Filament Dry Box

thingiverse

Filament Dry Box Design I assembled this filament dry box by combining parts from other designs and making some modifications. A key enhancement was adding a bump to the SinfoniaSam's 1/2" PVC pipe bracket, which ensures the PVC pipe snaps into place securely and doesn't move. To simplify the process of threading filament through when visibility is limited, I created an inner grommet with a funnel feature. The outer and inner grommets are based on Bummster's designs. This design helps to keep the filament organized and easy to manage. The tote used for this project was purchased at Target for around $30. It can be found online through Sterilite, a well-known brand in the storage industry. Materials Needed: * 50cm long 1/2" PVC pipe (a perfect fit) * A 'Wet Erase' marker for labeling filaments and printer settings * These markers are useful because they can be erased with a damp paper towel but resist accidental erasure To keep the marker handy, I velcroed it to the lid of the box. This convenient feature ensures that it's always within reach. Hardware Requirements: * M3 10mm bolts (32 pieces) * M3 nylon lock nuts (32 pieces) Tools Needed: * Drill with small bit for pilot holes * 1/2" drill bit for center filament holes * Small Philips screwdriver * Small M3-size socket Marking the box with a Sharpie was also necessary. Plenty of creative language was used during this project. Possible Improvements: * Using spacers on the PVC pipe to prevent filament spindles from rubbing or catching on each other * Creating a small basket to hold reusable desiccant (dehumidifier) * Desiccant can be found on eBay Print Settings: * Printer Brand: SeeMeCNC * Printer Model: ORION Delta 3D Printer * Rafts: No * Supports: No * Resolution: .3mm * Infill: 100% * Notes: I used six perimeters to ensure strength.