Filament Clip 1.75mm - stronger grip mod

prusaprinters

<p>This is a remix of a great clip by joshcarter, see remix source link (<a href="https://www.thingiverse.com/thing:3351901">https://www.thingiverse.com/thing:3351901</a>).<br/> What changed:</p> <ul> <li>some chamfers for easier installation</li> <li>tighter filament bend for a little stronger grip</li> </ul> <h3>Print instructions</h3><h3>Category: 3D Printer Accessories Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2 mm</p> <p><strong>Infill:</strong> 0%</p> <p><strong>Filament:</strong> any PLA funky colour, to easily spot on spools<br/> <strong>Notes:</strong></p> <p>Tips for faster print:</p> <ul> <li>print with extrusion width 0.7 mm (for 0.4 mm nozzle)</li> <li>0% infill</li> <li>print upper half with 0 top layers<br/> If you are using PrusaSlicer or compatible, then you can use the .3mf file with everything set up (just change printer to match yours). With these settings 9 pieces print in about 48 minutes at default speeds.</li> </ul>