Filament cleaner

prusaprinters

My remix of the thingiverse:https://www.thingiverse.com/make:1104356A simple filament cleaner, three versions closed with a clip with different hinge clearance.One version closed with two magnets with a diameter of 3 and height of 2mm (3x2mm).The version with 0.4 mm hinge clearance is easier to print and sufficiently usable - I am currently using the previous v2 version. Users @BKMorpheus_317287 and @SRDC_1903323 recommend a version with 0.25 mm hinge clearance - In my opinion, however, it is too tight.I added the 0.3 hinge clearance version are tight enough but not as hard to print as the 0.25 version. Is optimal for use, so I recommend it too.I destroyed my first two cleaners by opening them by pressing my finger on the lock. Over time I noticed that I could open and close them without touching the lock. The lock opens or closes by itself. Print PLA or PETG.Nozzle 0.4mm, layer 0.12 to 0.2mm. CONCLUSION💚💚💚If you enjoyed the project please like it.💚💚💚Post your makes and let me know how it works out for you. If anyone has any comments about them - I'd be happy to listen and improve the models.☕☕☕Did my project bring you joy, save you time or solve your problem? Share it with me and make me happy - buy me ko-fi.  ☕☕☕ At:https://www.printables.com/pl/model/893684-filament-cleaner-special-versionsI have created a separate magazine for versions modified at the request of users.If you don't like the official versions of my cleaner, maybe you will like one of the variations?Or maybe you need some modification to any of my versions of the cleaner? Write and I will try to help you to the best of my ability.****************************************************************************************************************************************************************************************************Updated 15.05.2024I have refreshed the photos of the models and prints for the new v3 versions.****************************************************************************************************************************************************************************************************Updated 03.05.2024I found time to print the versions with 0.25 hinge clearance and find that they are hinged too tight - intended for really well-calibrated printers.I leave them for people who like to print super tight hinges.I added the 0.3 hinge clearance version which I recommend instead of the 0.25 the hinges are tight enough but not as hard to print as the 0.25 version. ****************************************************************************************************************************************************************************************************Updated 17.04.2024To celebrate surpassing 1,000 downloads, I've updated the three v2 models to v3 - I've added the filament scroll direction marking on the walls of the cleaner.I've also added one version with a closure for two 3x2mm neodymium magnets (3mm diameter).Personally I think three snap closure models are sufficient and simple to make, but if someone wants a magnet closure then one pair of magnets should ensure the cleaner closes well.I haven't printed these new versions yet so would appreciate any feedback or comments. Updated 30.03.2024Due to the large number of downloads, I have decided to update the entire description along with the filament cleaner models.I have left the previous versions of the model along with the description for reference.I have included three current versions of the model:1. filament_cleaner_v2_hinge_clearance0_5mm v0.stlThis is the version with the highest clearance 0.5mm hinge.2. Filament_cleaner_v2_hinge_clearance0_4mm v0.stlThis is the version with the medium clearance 0.4mm hinge.3. Filament_cleaner_v2_hinge_clearance0_25mm v0.stlThis is the version with the hinge with the smallest clearance of 0.25mm.For new uncalibrated printers I recommend the 0.5mm hinge clearance version.The 0.4mm hinge clearance version is optimal for printing and use - I use this version.If someone has a printer that is well calibrated (primarily flow) they can try printing the 0.25mm hinge clearance version but I have not printed this version yet so I would appreciate any feedback or comments.If anyone has any comment on them - I would be happy to listen and correct the models.