Filament case / container
thingiverse
You will need four M8 x 25 screws, four M8 nuts, four XXL fi8 washers, four XL fi8 washers, and four 608ZZ bearings. Additionally, twenty M3x16 screws, twenty M3 nuts, one meter and a half of 2/4 PTFE tubing made from Teflon pipe, and one PC4-M6 component will be required. Parts cut from 5mm Plexiglas are also necessary. Print settings include: Rafts: Not specified, but can be omitted if desired. Supports: Yes, supports should be enabled for this print. Resolution: The resolution has been set to 0.2 mm, which is suitable for most applications. Infill: The infill percentage will be set to 100%, resulting in a fully solid object.
With this file you will be able to print Filament case / container with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Filament case / container.