Filabracket (storage system)

thingiverse

This is my concept for a Filament storage shelf. I employed 12 mm steel rods to connect the brackets, however, you can also utilize wood or aluminum pipes. The middle section might experience slight bending in this instance; consequently, I designed an additional bracket to provide support. Print this model in ABS or PETG; I haven't attempted printing it with PLA. **Print Settings** * Printer Brand: RepRap * Printer: I3 Steel * Rafts: Unnecessary * Supports: None required * Resolution: 0.25 mm * Infill: 25-30% (triangular or honeycomb) * Notes: * I printed it using a 0.4 nozzle with 4 perimeters for added stability. * Avoid using less than 25% infill; you might need to add a brim. * The design is optimized to fit well on a 20 x 20 cm Printbed. * The hole diameter is 12.2 mm. * You should expect each part to weigh approximately 100 grams. * I've also included some simple screw coverplates. Have fun printing it and share your photos with us!