fidget spinner for 625 bearings

thingiverse

this is a nice and simple model for a 3 legged fidget spinner for 625 sized bearings which are commonly used on 3d printers. to make this spinner, you will need to print: 1X fidget spinner.stl 2X spinnerCap.stl you will also need 4X 625 size bearings. the cap should be printed upside down (top down); assembly: the bearings and caps need to be hammered in to place, without damaging the bearings. 1.after printing, put the spinner on a flat surface, take one bearing and place it on one of the spinner holes. 2. take a block of scrap wood- and place on top of the bearing 3. hit the wood with a hammer until the bearing sits flush inside the spinner. repeat the process for all 4 bearings, and 2 spinner caps 4. enjoy your spinner!