FGC-6 S AF H MKI / MKII basic outer barrel and suppressor set

prusaprinters

as part of the big V24 update. the 14mmccw barrels have been made a bit strongerand partisan 6 barrels have been added-14mm CWW barrel tips have been added --- these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.the file naming works as fallows: 227 slim barrel 00mm 9 18mmID(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)-for the suppressor model there are a view notes with that since it got a limited shroud option. it will basically only work on small barrel retainers like the stock MKII model. others are getting to long.FGC6 suppressor (inner barrel 249mm max) for:MKI UNW shroud MKII UNW short, MKII UNW TEC9 SHORToriginal MKII barrel retainer-the video about it can be found here.https://odysee.com/@UntangleWORKS:a/FGC6FA-outerbarrel:fhttps://youtu.be/0dA8RhMdQiI-materials needed:shroud4x M3 washer4x bolt m3 35mm or 40mm longsuppressor 2x bolt m2,5 18mm or 20mm long-print settings:0.2 layer hight should be fine.you can use the 8 layer walls and a 40% infill.but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…