
Fetish 2.5in micro quad
thingiverse
The Quirk is a 115mm true X frame. 11xx motors with M2 holes, 5mm eye to eye. 3-inch props. I designed it around the HGLRC XJB F428-TX20 AIO Flight controller. You may be able to fit other 20x20 stacks in but I've tested nothing else myself. It looks like the new versions of this stack should fit with my parts list, which weighs in at 79g without props and lipo. AUW 138g You'll need to print four FC stack mounts in TPU and install one M2 heat set threaded inserts into each. There is a picture above showing the placement of the inserts illustrated in red. The blue arrows show that the canopy feet (highlighted in blue) be stretched around the mounts and sandwiched between the carbon and the inserts. The holes will line up for M2 x 8mm screws. The frame should be cut in 2mm carbon. Make sure that the grain of the weave runs perpendicular with the arms for maximum rigidity. Demo flight video https://youtu.be/n3MGvlfQi_w My Parts List: Printed parts - TPU Frame - 2mm plain weave carbon (http://www.cncmadness.com/carbon-fiber.html) Hardware - M2 x 8mm socket head screws (https://www.mcmaster.com/standard-socket-head-screws) M2 x 3mm Heat set threaded inserts (https://www.mcmaster.com/threaded-inserts) Electronics - HGLRC XJB F428-TX20 (https://www.hglrc.com/products/hglrc-xjb-f428-tx20-v2-omnibus-f4-flight-controller-28a-2-4s-blheli_s-esc-25-100-200-350mw-vtx-for-rc-drone) RX - FrSky R_XSR (https://pirofliprc.com/FrSky-R-XSR-SBusCPPM-816-Channel-Micro-Receiver_p_4251.html) Motors - Hyperlite 1106 5122kv (https://pirofliprc.com/HyperLite-1106-5122KV-Race-Series_p_4367.html) Props - Gemfan 2540 Flash (https://pirofliprc.com/GEMFAN-2540-FLASH-TRI-BLADE-PROP-4CW4CCW_p_4449.html) FPV Camera - Runcam micro swift (Will fit any 19mm micro camera) Battery strap - 10x130mm (https://www.amazon.com/gp/product/B07B9TTT73/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1) Batteries - Tattu 4s 450mAh (https://www.amazon.com/Tattu-14-8V-450mAh-Battery-Multirotor/dp/B072J69HCW/ref=sr_1_1?ie=UTF8&qid=1538964254&sr=8-1&keywords=tattu+4s+450mah&dpID=516DlXxTRBL&preST=_SY300_QL70_&dpSrc=srch)
With this file you will be able to print Fetish 2.5in micro quad with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Fetish 2.5in micro quad.