Ferris Wheel Planter

myminifactory

This is my Ferris Wheel Planter, my entry for My Mini Factory's TinkerCAD Design Competition. You can find it on TinkerCAD here: https://www.tinkercad.com/things/e8S2aN5m0Xl-ferris-wheel-planter. Assembly: 1) Print the 3 included files on your printer at 30% infill and at medium quality, requiring supports but not a raft. 2) Remove all of the supports from your print with care. 3) If desired, paint your ferris wheel parts; however, be aware that the paint may make the rods too thick for the carts to fit onto them. Be cautious when painting, knowing where to avoid it. 4) Place the ferris wheel part with the six rods facing upward and position all 6 carts on these rods precisely. 5) For added stability, apply a small amount of glue to the top of each rod and place the second ferris wheel part with the 6 slots facing downwards directly parallel to the first one. Ensure that the rods are securely locked inside the slots; then clamp it firmly by placing a heavy book on top. Use regular, super, or hot glue for this process. 6) Once everything is dry, attempt to swivel the carts on their axles. If any glue accidentally stuck to a cart (especially with hot glue), this step should help break the bond. If needed, use a small knife to carefully cut away the glue from the cart. 7) Place the completed ferris wheel onto the rod of the first half of the stand. Position both parts on the table with the exposed rod sticking straight up. 8) Apply glue to the rod and place the matching slot from the second half of the stand on top, clamping it securely with a heavy book. Make sure that the 2 supports at the base of the stand fit into their appropriate slots correctly; you can also use a little bit of glue for extra security. 9) You have now completed your Ferris Wheel Planter.