Ferrari SF71H 2018 Formula 1 Car

prusaprinters

All credits to the original publisher BMDoubleU. This design has been modified from their original design.This is a tricky print, even with the best printers, I found I got the best results with the settings below. It will still take a lot of support removal and assembling but it's completely worth it.NOTE: The 3MF file is only provided for your reference, please ensure to orientate the parts correctly according to your own circumstances. I would not recommend printing directly from the provided 3MF. Printed at 0.12 (marked with a *) - 0.2mm (everything else) layer height and around 10% infill on all objects. Supports will be required for the majority of objects (basically everything except the wheels and steering wheel). I found that organic tree supports worked the best in terms of removal and final finish. You may want to consider moving some of the parts down on the build plate to reduce the amount of supports needed (e.g. for the plank underneath the car).The parts will require gluing once printed. I would recommend getting the body assembled first then carefully positioning the suspension and wheels to make sure it sits flat. The parts you will require are: 1 x Part 11 x Part 21 x Part 32 x Front Suspension* (1 x regular, 1 x mirrored)2 x Front Wheels2 x Rear Suspension* (1 x regular, 1 x mirrored)2 x Rear Wheels1 x Front Wing*1 x Halo* (either Halo_V2 or Halo_With_mirrors)1 x Steering Wheel*