Fenders for Ownboard Bamboo/Carbon GT

thingiverse

I made these custom fenders specifically for my Ownboard Bamboo GT with Cloudwheels. They feature a 3/4"x3/4" rubber vibration damping stud, which allows them to remain flexible, preventing the wheel from locking up and the fender from breaking in case something gets caught between the two. Although I believe they will work on the carbon version of my board, I haven't tested it, so I'm not sure if there's enough clearance. The front trucks and motor covers might be compatible with other similar boards as well; please let me know if you've used them successfully on anything other than an Ownboard. To build these fenders, you'll need to gather the necessary parts, which are listed below. If you'd like to support my Shredlights project, consider donating to my gofundme page, where I've spent hours of my spare time designing and building these custom fenders - any contribution would be greatly appreciated! https://www.gofundme.com/f/donations-for-shredlights-night-ops-pack?utm_medium=copy_link&utm_source=customer&utm_campaign=p_lico+share-sheet Here are the required parts: (4x) 1/4-20 rubber mounts with stud: https://www.mcmaster.com/9376k19 (4x) 6-32 pan head screws, 1" long: https://www.mcmaster.com/91772a153 (4x) 6-32 nylon insert lock nuts: https://www.mcmaster.com/90631a007 (6x) 1/4-20 thin nylon insert lock nuts: https://www.mcmaster.com/90566a029 (4x) standard 1/4-20 nuts: https://www.mcmaster.com/95462a029 (2x) 1/4-20 hex head screws, 3/8" long: https://www.mcmaster.com/92240a535 The only part you might need to order from McMaster is the '1/4-20 rubber mount with stud', as everything else is standard. However, I designed these fenders specifically for use with this exact item from McMaster.